DENOMINACIÓN COMPOSITE PROCESS MONITORING SYSTEM 4.0
The proposed system makes it possible to monitor and control the forming and curing process in real time. Based on the data provided by the sensors, it calculates in real time the state of the material (viscosity, curing, etc. ....) and provides alarms and recommendations (pressure increase, temperature increase, end of curing and mould opening) for quality assurance and/or process optimisation (costs, times, energy consumption). It allows the use of current process monitoring systems (thermocouples, pressure sensors ....) without the need to acquire other more sophisticated sensors and is customisable according to the production means and needs of the client. In the following link you can see an example of implementation of the system https://www.youtube.com/watch?v=aFKAQGLwgsU In addition to real time monitoring, it features pre- and post-process modules. The first one allows to simulate the process to choose the best conditions, the second one allows to graph and analyse the different production cycles.
ÁMBITOS DE APLICACIÓN
Conformado avanzado
EQUIPOS Y COMPONENTES MÁS DESTACADOS
-
Hardware (computers, data acquisition cards, control cabinets)
Hardware (computers, data acquisition cards, control cabinets)
-
Temperature, pressure sensors,
SERVICIOS OFRECIDOS POR EL ACTIVO
MONITORING AND CONTROL SOFTWARE AND CONTROL OF THE FORMING AND CURING PROCESS.
Development and implementation of a system to monitor and control the forming and/or curing process. The software performs real-time calculations of the evolution of the critical variables of the process and is adaptable to the production and monitoring means.Interest of customer (quality, time, energy consumption) .
ENTIDAD QUE GESTIONA EL ACTIVO
Persona de contacto:
Isabel Harismendy Ramirez de Arellano
isabel.harismendy@tecnalia.com