NAME Pilot plant for the development and manufacture of components for extreme conditions: ceramics, MMC-s and CMC-s, coatings, advanced joints.

The pilot plant for the manufacture of components for extreme conditions has the following lines of work: 1.- Manufacture of Ceramics-CERMETS-MMC and MCM-s: • Facilities for the adaptation of the raw material: Grinding and mixing, granulation (spray drying and fluidized bed), preparation of Feedstock: feedstocks for the process of injection molding of powders and for additive manufacturing by extrusion of material, synthesis of ceramics and cermets • Cold pressing forming: uniaxial pressing, PIM and additive manufacturing. • Sintering without pressure (furnaces up to 2000ºC with different atmospheres) and sintering assisted with mechanical pressure (hot press, SPS and ERS). 2.- Processes of Advanced Unions: • Micro-Laser for the wleding of very thin parts and materials that require a low thermal input. • Brazing / diffusion bonding process: Brazing furnace that works up to 1200ºC in different degrees of vacuum. It has a forced cooling system to adequate the cooling rate. • Induction brazing equipment. • Access to electron beam welding (EBW) equipment for the development of high requirements joints. 3.- Manufacture of high performance coatings: • Plasma Spray thermal projection process: Atmospheric Plasma Spray (APS). • High speed deposition processes: High Velocity Oxy Fuel (HVOF). • Specific deposition processes developed in TECNALIA: detonation: High Frequency Pulse Detonation (HFPD) and high speed combustion: High Velocity Combustion: Oxy-Fuel Ionization (OFI) and HVOF / HVAF.