Advanced systems for metallurgical characterization of metals in liquid and solid state in pilot plant or in industrial plant.
DESCRIPTION
Azterlan has extensive equipment for characterizing the quality of metal in both liquid and solid states for components and test parts manufactured by casting or other metal transformation process such as forging, stamping, additive manufacturing, etc.
The equipment for liquid metal characterization is portable, allowing testing both at Azterlan facilities and on-site at customer plants. By comparing microstructures (phases, porosity, inclusions) and properties, optimal process parameters can be identified to improve the process performance.
MOST OUTSTANDING EQUIPMENT AND COMPONENTS
Advanced Corrosion LaboratoryPotentiostats/Galvanostats: Autolab PGSTAT302N and a FRA32M module for impedance. Autolab PGSTAT101 (portable). Hydrogen permeation: Two PGSTAT302F potentiostats. Surface quality control instruments: Mobile Surface Analyzer MSA (KRUSS) and CleanSpector (SITA) for fluorescence inspection. Technical resources for stress testing in natural atmospheres or H₂S-type environments. Methods for applying stress include constant strain (multi-point bending tests) or constant load. Corrosion chambers for salt spray and condensed vapor atmospheres. Combined cycle chambers.
Equipment for evaluating dimensional changes in metal samples during heating and/or cooling at various rates. Helium is used for high-speed testing. The dilatometer enables the development of CCT and TTT diagrams and determines the minimum cooling rate to avoid forming specific phases.
Azterlan has proprietary analysis tools: Thermolan®, Thermolan-Al, Alu-Q, density at 80 mbar, micro and macroinclusion tests. Test sample molds for evaluating mechanical properties, castability, inclusions, feeding capacity, etc. Also includes commercial equipment for O₂ and H₂ measurement in steels, thermal cameras, pyrometers, etc.
Stereomicroscopes and optical microscopes are equipped with image analysis systems. An optical microscope with a heating stage allows thermal cycling of the sample under study. The FEG-SEM is equipped with energy-dispersive X-ray detectors (EDS), wavelength-dispersive spectroscopy (WDS), and electron backscatter diffraction (EBSD).
Chemical analysis, hardness tests, three-axis fatigue bench, Small Punch tests, pull-out tests, residual stress evaluation by hole drilling, magnetometer with multiple sensors, and computed tomography tests with capabilities for surface and defect reconstruction, Airpointer equipment for real-time monitoring of pollutant gases such as NOx, CO, SO₂, O₃, and volatile organic compounds (VOCs), Grimm 365 equipment for measuring particulate matter PM₁₀, PM₂.₅, and PM₁, etc.
SERVICES OFFERED BY THE ASSET
Defect characterization: identification of possible causes and proposal of solutions
Environmental, fatigue, intergranular, and pitting corrosion tests
Environmental, fatigue, intergranular, and pitting corrosion tests:
Liquid metal (melt) characterization
Metal characterization: microstructure and properties
ENTITY MANAGING THE ASSET
FUNDACIÓN AZTERLAN
Contact person: Susana Méndez
