Lab for validation and optimization of cold forging processes
The lab, located in Miguel Altuna vocational training institute, includes facilities and different equipment to validate and /or optimize the fabrication processes of components manufactured in cold forging. The design concept is first validated by FEM simulation. Then, there are equipments to carry out real experiments where different variables can be monitorized and measured: loads, effect of lubricants , material flow, friction conditions, suitability of the tooling set, part’s transfers, etc. The trials are semi industrial so that the results are comparable with real production.
By means of the FEM softwares Forge and Simufact the influence of multiple parameters in the manufacture of forged components is studied,
5 stroke progresive press Sacma SP260, cutting diameter 10 mm, equipped with stress sensors at all stations.
3ooTn screw press for hot forging of aluminium and brass.
Diregi thread rolling machine
Analysys of features of lubricant systems in cold forging processes
Modelization of cold forging processes
Study of the forjability of different materials
Validation of complex cold forging operation
Tknika Centro de Investigación e Innovación de la Formación Profesional de País Vasco.
,
Contact person:
Jon Mirena Labaka
Let us get to know you better. Answer some questions and your 4.0
link will present you with the best proposal for incorporating 4.0 solutions